EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Prášok z nehrdzavejúcej ocele AISI 410 pre 3D tlač
Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Alloy 410 displays maximum corrosion resistance when it's been hardened, tempered, and then polished.
Popis
Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Alloy 410 displays maximum corrosion resistance when it’s been hardened, tempered, and then polished.
Všeobecné informácie
| Miesto pôvodu: | Changsha, Čína |
| Značka: | PRÁŠOK HLP |
| Riadok: | AISI 410 |
| Veľkosť častíc: | 15 – 53 μm/ 15 – 45 μm |
| Certifikat: | ISO9001, ISO14001 |
| Minimálne odberové množstvo: | 20kg |
| Balenie Podrobnosti: | Železný sud |
| Dodacia lehota: | 7-10 dni |
použitie
● Letectvo a kozmonautika
● Automobilový priemysel
● Lekárske implantáty a zariadenia
● Priemyselné nástroje a formy
● Presné inžinierstvo
● Mechanical and Engineering
● Prispôsobenie
technické údaje
Chemické zloženie:
| Zliatina | Cr | Ni | Si | Mn | C | Fe |
| 410 | 11.50-13.50 | ≤0.60 | ≤1.00 | ≤1.00 | ≤0.15 | Bal |
Poznámka: Iné prášky pre 3D tlač sú k dispozícii na základe akýchkoľvek požiadaviek na prispôsobenie.
Veľkosť častice:
| Veľkosť častice | Citlivosť na poklepanie | Tekutosť | Distribúcia veľkosti častíc | ||
| D10 | D50 | D90 | |||
| 15-45μm | ≥4.5 | ≤20 | 15-22 | 26-35 | 46-55 |
| 15-53μm | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Poznámka: Iné prášky pre 3D tlač sú k dispozícii na základe akýchkoľvek požiadaviek na prispôsobenie.
Charakteristiky prášku
● Vysoká sférickosť a vysoká tekutosť
● Low oxygen content
● Atomizácia plynu dusíkom
Balíček
Pre 3D tlač: Každé PE balenie + 20 kg plechovky alebo 25 kg/50 kg železný sud alebo 250 kg železný sud.
