EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Prášok na báze niklu Inconel625 pre 3D tlač
Inconel 625 is a nickel-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
Popis
Inconel 625 is a nickel-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
Všeobecné informácie
| Miesto pôvodu: | Changsha, Čína |
| Značka: | PRÁŠOK HLP |
| Riadok: | Inconel625 |
| Veľkosť častíc: | 15-53μm |
| Certifikat: | ISO9001, ISO14001 |
| Minimálne odberové množstvo: | 20kg |
| Balenie Podrobnosti: | Železný sud |
| Dodacia lehota: | 7-10 dni |
použitie
● Petrochemical
● Námorné inžinierstvo
● Automobilový priemysel
● Aerospace
● Výroba zdravotníckych pomôcok
technické údaje
GH3625(Inconel625):
| Položka | C | Si | Mn | Ni | Cr | Co | Mo | Al | Ti | Cu | Nb | P | S |
| GH3625 | ≤0.1 | ≤0.5 | ≤0.5 | Bal | 20.0-23.0 | ≤1.0 | 8.0-10.0 | ≤0.4 | ≤0.4 | ≤0.07 | 3.15 4.15- | ≤0.015 | ≤0.015 |
Veľkosť častice:
| Veľkosť častice | Citlivosť na poklepanie | Tekutosť | Distribúcia veľkosti častíc | ||
| D10 | D50 | D90 | |||
| 15-53μm | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Vlastnosti súčiastky:
| Hustota častíc (g/cm³) | ≥8.4 |
| Tlačené (xy) | |
| Pevnosť v ťahu (MPa) | ≥930 |
| Medza klzu (MPa) | ≥660 |
| Predĺženie A10 (%) | ≥25 |
| Tvrdosť HV/HRC | ≥260 HV5/15 |
Charakteristiky prášku
● Vysoká sférickosť a vysoká tekutosť
● Nízky obsah kyslíka
Balíček
Pre 3D tlač: Každé PE balenie + 20 kg plechovky alebo 25 kg/50 kg železný sud alebo 250 kg železný sud.
