EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Prášok AISI 2507 pre 3D tlač
Metal 3D printing, also known as metal additive manufacturing, is an advanced fabrication technique that involves layer-by-layer deposition of metal powder or metal wire material, which is then melted using a heat source such as a laser beam or an electron beam. This process allows for the rapid creation of metal parts. Compared to traditional manufacturing methods, metal 3D printing offers advantages in terms of efficiency, versatility, and precision, leading to its widespread application in industries such as aerospace, automotive manufacturing, and medical devices.
AISI 2507, also known as duplex stainless steel, is a material known for its excellent corrosion resistance, high strength, and good weldability.
Popis
Metal 3D printing, also known as metal additive manufacturing, is an advanced fabrication technique that involves layer-by-layer deposition of metal powder or metal wire material, which is then melted using a heat source such as a laser beam or an electron beam. This process allows for the rapid creation of metal parts. Compared to traditional manufacturing methods, metal 3D printing offers advantages in terms of efficiency, versatility, and precision, leading to its widespread application in industries such as aerospace, automotive manufacturing, and medical devices.
AISI 2507, also known as duplex stainless steel, is a material known for its excellent corrosion resistance, high strength, and good weldability.
Všeobecné informácie
| Miesto pôvodu: | Changsha, Čína |
| Značka: | PRÁŠOK HLP |
| Riadok: | AISI 2507 |
| Veľkosť častíc: | 15 – 53 μm/ 15 – 45 μm |
| Certifikat: | ISO9001, ISO14001 |
| Minimálne odberové množstvo: | 20kg |
| Balenie Podrobnosti: | Železný sud |
| Dodacia lehota: | 7-10 dni |
použitie
● Chemical and Petrochemical Industry
● Pobrežné a námorné inžinierstvo
● Ropný a plynárenský priemysel
● Zdravotnícke pomôcky
● Letecký priemysel
● Energetický priemysel
● Stavebníctvo a pozemné stavby
technické údaje
Chemické zloženie:
| Zliatina | Cr | Ni | Mo | Cu | Si | Mn | N | C | Fe |
|
AISI 2507 |
24.00-26.00 | 6.00-8.00 | 3.50-4.50 | ≤0.50 | ≤1.00 | ≤2.00 | 0.24-0.35 | ≤0.03 | Bal |
Veľkosť častice:
| Veľkosť častice | Citlivosť na poklepanie | Tekutosť | Distribúcia veľkosti častíc | ||
| D10 | D50 | D90 | |||
| 15-45μm | ≥4.5 | ≤20 | 15-22 | 26-35 | 46-55 |
| 15-53μm | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Charakteristiky prášku
● High Sphericity& High flowability.
● Low oxygen content.
● The Oxygen content is under 600PPM.
● Narrow Particle Size Distribution.
Balíček
Pre 3D tlač: Každé PE balenie + 20 kg plechovky alebo 25 kg/50 kg železný sud alebo 250 kg železný sud.
