EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Prášok na báze niklu Inconel718 pre 3D tlač
In718 is a high-performance nickel-based superalloy that is widely used in the aerospace industry for its excellent strength, oxidation resistance, high-temperature corrosion resistance, and balanced performance-to-cost ratio.
It is particularly utilized in the manufacturing of critical components such as engine blades, turbine disks, and combustion chambers. With the advancement of 3D printing technology, In718 has become an important material in the additive manufacturing field, especially in technologies such as selective laser melting (SLM) and electron beam melting (EBM).
Popis
In718 is a high-performance nickel-based superalloy that is widely used in the aerospace industry for its excellent strength, oxidation resistance, high-temperature corrosion resistance, and balanced performance-to-cost ratio. It is particularly utilized in the manufacturing of critical components such as engine blades, turbine disks, and combustion chambers. With the advancement of 3D printing technology, In718 has become an important material in the additive manufacturing field, especially in technologies such as selective laser melting (SLM) and electron beam melting (EBM).
Všeobecné informácie
| Miesto pôvodu: | Changsha, Čína |
| Značka: | PRÁŠOK HLP |
| Riadok: | Inconel718 |
| Veľkosť častíc: | 15-53μm |
| Certifikat: | ISO9001, ISO14001 |
| Minimálne odberové množstvo: | 20kg |
| Balenie Podrobnosti: | Železný sud |
| Dodacia lehota: | 7-10 dni |
použitie
● Letectvo a kozmonautika
● Energetický priemysel
● Automobilový priemysel
● Zdravotnícke pomôcky
● Priemyselné a mechanické komponenty
technické údaje
GH4169 (Inconel718):
| Položka | C | SI | Mn | Ni | Cr | Co | Mo | Al | Mg | Ti | Nb | P | S | Fe |
| 4169 GH¢ | ≤0.08 | ≤0.35 | ≤0.35 | 50.0-55.0 | 17.0-21.0 | ≤1.0 | 2.8-3.3 | 0.2-0.8 | ≤0.01 | ≤0.3 | 0.65 1.15- | ≤0.015 | ≤0.015 | Bal |
Veľkosť častice:
| Veľkosť častice | Citlivosť na poklepanie | Tekutosť | Distribúcia veľkosti častíc | ||
| D10 | D50 | D90 | |||
| 15-53μm | ≥4.5 | ≤20 | 16-26 | 30-38 | 52-58 |
Part's properties:
| Hustota častíc (g/cm³) | ≥8.18 |
| Tlačené (xy) | |
| Pevnosť v ťahu (MPa) | ≥1050 |
| Medza klzu (MPa) | ≥750 |
| Predĺženie A10 (%) | ≥22 |
| Tvrdosť HV/HRC | ≥280 HV5/15 |
Charakteristiky prášku
● Vysoká sférickosť a vysoká tekutosť
● Nízky obsah kyslíka
Balíček
Pre 3D tlač: Každé PE balenie + 20 kg plechovky alebo 25 kg/50 kg železný sud alebo 250 kg železný sud.
